

	kakto kazva Pekka - negovite step by step instrukcii sa kakto na Web stranicata ...

	eto mu u mejla ...


============================================================================================


Hi Emil

I noticed that I've been giving you wrong instructions. Sorry, I thought that the recommended 
and easiest way is to use the linuxcnc distribution iso. As I read more closely the LinuxCNC 
documentation, for uspace version even they suggest you to download the standard debian wheezy 
and then install the preemt-rt kernel and then LinuxCNC. 

See chapter 7.1 here 

http://linuxcnc.org/docs/html/getting-started/getting-linuxcnc.html.

So I tried installing standard Debian Wheezy on virtual machine from 
https://www.debian.org/releases/wheezy/debian-installer/ and then went through the steps
 mentioned in chapter 7.1. 

Attached is my notes,

 but they are basically one to one with the
 instructions. With that, I was able to compile the ethernet_rt and run it.

Very professional machine you got there, the resolution on etch resistant was superb! I'll 
send some pictures when I got this mounted to my machine.

BR,
Pekka